DK30 Flow-Through Chamber

DK30 Flow Through ChamberDK30 Continuous Flow Through Chamber

To be used with the X1000D Homogenizer…
Price: Call for pricing
Volumes: G20 Shaft = 2,000 liters an hour | G30 Shaft = 3,000 liters an hour.

Please CALL 805-709-1056 to place your order.



Description


Our small but efficient DK-30 flow through chamber is just  the ticket when you need to turn your CAT homogenizer drive motor into an in-line processing tool.  Used with the G20 or G30 sealed shafts on the mounted homogenizer drive motor this stainless steel chamber with attached tubes draws sample in from the bottom, passes it through the rotor-stator generator assembly and expels it to the side.  Its advantage over a standard rotor-stator generator is that you can extend dwell time in order to more thoroughly homogenize your samples – simply by restricting the outlet tube.You can draw and return samples from the same container or draw from container A and discharge to container B for in-line processing.

Use only with sealed shafts; G20 or G30, Cat. No. 60428-00

For help you can either ask us a question or contact us.

 

See also…

X1000D Homogenizer Drive        Homogenizer Drive Listing       AX60 Analytical Mill


Specifications


Type: Unidrive X1000D Specifications
Motor Power intake 1050 Watt
Motor Power Output 650 Watt
Idle speed 4000 – 33000 rpm
Voltage 230V/50 Hz or 110V/60 Hz
Case dimensions 78x75x310 mm, WxDxH
Speed Display Yes
Weight 2.2 kg
Permissible Ambient Temperature 5 – 40 C
Permissible Humidity 80 % RH


Accessories


Accessories

There are no accessories for the DK30 Continuous Flow Through Chamber

Articles


Manuals/Files